non-slip coating for timber

A less common solution, due to the lack of available products, is a non-slip wood finish that won’t hide the beauty of your hardwood stair treads. A non-slip coating for timber stairs is a great way to make your wood stairs safe to walk on without altering the natural look of your wood. Using non-slip flooring is a great option if you don’t want to change the look of your stairs by installing carpet, or if you don’t want to deal with the minor issues that come with using transparent adhesive treads. Non-slip flooring is a liquid solution that can be applied directly to wooden stairs to make them less slippery.

One of the quickest and easiest ways you can install an outdoor wood staircase yourself is to install non-slip treads or handles. If you have outdoor wooden steps, you can simply install EdenProducts Anti-Slip Traction Tape to make them non-slip. This is by far the easiest and cheapest way to eliminate the risk of slipping on wooden steps.

Protect your wood floors and stairs with SlipDoctors high-quality anti-slip wood finishes and sprays. To make outdoor wood stairs non-slip, you can install treads or handles, paint grain, sand, apply wood-safe ice mortar, and even install snow melting mats for the winter. Placing non-slip treads on outside steps can give you peace of mind knowing that every member of your family is well protected from slippery stairs.

With less traction and grit, the slippery exterior can cause you to slip and fall. The best way to reduce the risk of slipping on hardwood floors is to keep them clean and dry. Wood floors are not inherently slippery, but they can become slippery after waxing or polishing, especially if the floor surface is dirty.

HSE recommends laying floors with sufficient surface roughness (floors with abrasive surfaces) to prevent slipping when wet or icy. They also recommend using sand on icy or slippery surfaces such as steps and stairs. 

The use of advanced technology ensures that the product prevents slipping from any type of wooden stairs, floors and equipment. Industrial grade product for the best riser paint.

One gallon of paint can cover 75-100 square feet in one coat depending on the surface. You can also apply multiple coats of paint to the stairs, which will keep you safe and non-slip. If you don’t like the look of the carpet, clear stair slats, non-slip coatings, sprays and paint additives will also work, be sure to remove the wax from the stairs first. The main benefit is that you can achieve your goal by making your steps less fluid.

Non-slip floor surfaces will provide a safe and happy environment for all employees, visitors and customers while increasing productivity. Our non-slip surface solutions are suitable for almost any work area including your offices, entrances, factory floors, stairs, walkways, workshops, canteens, restaurants, clubs, kitchens, bathrooms and locker rooms, parking lots, exteriors and interiors.

Finishing outdoor steps with a wooden float or broom is a common way to make them non-slip. The easiest way to make wood steps less slippery is to add texture in the form of a rug or stair railing. These anti-slip coatings are supposed to roughen the surface of the stairs, make them more grippy, and ensure they won’t slip while there’s still water or snow on the surface.

By adding a bit of roughness to the surface of each tread, these non-slip treads successfully prevent slipping. To prevent slipping, the thick black tape will most likely be pasted on each ladder.

They are available as clear lacquer or a clear coat that can be applied to the stairs. Fine particles are mixed with the coating to increase friction on the surface of the wood. However, the friction created by the carpeting layer far outweighs the fine particles in the finish.

Instead, most manufacturers supply a packaged anti-slip floor paint additive that can be added to any floor paint, including timber floor finishes, to make the surface non-slip. Since any coating can be combined with the additive, the mixture can be applied to any substrate, although coarser aggregate is less effective as an anti-slip coating on wooden stairs.

This type of anti-slip paint for wood exists in the form of a one- and two-component system (2K is considered more resistant). You can also purchase rubber or polymer plastic chips to mix with the paint. If you’re ready to change the colour of your slippery stairs, there are plenty of non-slip wood surface paints available for extra grip and safety.

It can be applied to indoor and outdoor floors, as non-slip stair paint, patio paint, as well as in residential and commercial areas. It is a fast-drying varnish that can be quickly applied to areas such as outdoor steps, decks, balconies, tile floors, garage floors, ramps and more, preventing slips and falls. Once the colour is done, you can use it on finished wood surfaces to change their colour. Unlike traditional wood stair interior paint, this one is very easy to apply.

The process involves rolling them up the stairs and ensuring the sticky sides are touching the wood. They prevent slipping by adding roughness to the inner and outer scales. They look like thick black tape to prevent slipping on slippery floors. They are a cheaper option for troublesome stairs and provide long-lasting grip in a variety of grit sizes, from childish to rough commercial timber finishes.

Fibreglass sheets, fibreglass stair treads and fibreglass stair treads are ideal for outdoor anti-slip, durable and easy to install.